Vism Deluxe Gunsmithing Kit

$59.99

  • Tool Kit Contents:
  • Safety Glasses
  • Mallet with Nylon & Brass ends – 11″L
  • Screw Driver Handle with ¼” Hex Drive – 7.4”L
  • Needle Nose Plier – 4.5″L
  • Triangle Mill file – 7.7″L
  • Gunsmith Bench Block – 4″ Dia. Nylon
  • 6 Pcs Jewelers’ Screw Drivers Set:
    • Phillips – #0, #1, Flat
    • Blade – 1.4, 2.0, 2.4, 3.0
  • 8 Pcs Steel Punch Set:
    • Roll Pin Drift Punch – 3/32″, 3/16″, 7/32″, 1/4″
    • Drift Punch – 3/32″, 1/8″, 3/16″
    • Center Punch – 4.8″L
  • 5 Pcs Brass Punch Set:
    • Brass Drift Punch – 1/8″, 5/32″, 7/32″, 1/4″, 5/16″
  • 6 Pcs Polymer Punch Set:
    • Polymer Drift Punch – 7/32″, 5/16″ 
  • 30 Pcs 1/4″ Screw Bit Set:
    • Flat Blade(mm) – 3, 4, 5, 5.5, 6, 7
    • Phillips: PHO, PH1, PH2, PH3, PZ0, Z1, PZ2, PZ3
    • Hex: H3, H4, H5, H6
    • Torx: T10, T15, T20, T25, T27, T30, T40
    • 1/4″ Hex Bit to 1/4″ Socket Adapter
    • Square: S1, S2, S3

In stock

  • Tool Kit Contents:
  • Safety Glasses
  • Mallet with Nylon & Brass ends – 11″L
  • Screw Driver Handle with ¼” Hex Drive – 7.4”L
  • Needle Nose Plier – 4.5″L
  • Triangle Mill file – 7.7″L
  • Gunsmith Bench Block – 4″ Dia. Nylon
  • 6 Pcs Jewelers’ Screw Drivers Set:
    • Phillips – #0, #1, Flat
    • Blade – 1.4, 2.0, 2.4, 3.0
  • 8 Pcs Steel Punch Set:
    • Roll Pin Drift Punch – 3/32″, 3/16″, 7/32″, 1/4″
    • Drift Punch – 3/32″, 1/8″, 3/16″
    • Center Punch – 4.8″L
  • 5 Pcs Brass Punch Set:
    • Brass Drift Punch – 1/8″, 5/32″, 7/32″, 1/4″, 5/16″
  • 6 Pcs Polymer Punch Set:
    • Polymer Drift Punch – 7/32″, 5/16″ 
  • 30 Pcs 1/4″ Screw Bit Set:
    • Flat Blade(mm) – 3, 4, 5, 5.5, 6, 7
    • Phillips: PHO, PH1, PH2, PH3, PZ0, Z1, PZ2, PZ3
    • Hex: H3, H4, H5, H6
    • Torx: T10, T15, T20, T25, T27, T30, T40
    • 1/4″ Hex Bit to 1/4″ Socket Adapter
    • Square: S1, S2, S3

Additional information

upc

848754001283

Reviews

There are no reviews yet.

Be the first to review “Vism Deluxe Gunsmithing Kit”

Your email address will not be published. Required fields are marked *